We create a self-propelled construction 3D printer and mobile mixing solution from local raw materials. Our printer is composed of a crawler chassis, a hydraulic lift and a 7m telescopic boom. Thus, we will be able to build buildings of unlimited sizes in the plan, in parts, as bricklayers do now. The maximum height is 5 meters (the height can be increased, the design of the elevator allows it).
The mobile mixer produces a mixture of natural moisture sand, cement and chemical additives. This will make it possible to reduce the cost of the material obtained.
Stage of the project.
Mechanics: Crawler chassis with hydraulic lift and slicer boom length 4 meters 90 percent readiness.
Electronics. The process of desoldering 2 versions of electronic boards has been developed. 90%
Software: based on open sources.
Delaware corporation established.
USA, Canada, UK, Europe
Проблема или Возможность
In developed countries, there is a shortage of qualified bricklayers, and this trend is accelerating. The work of a bricklayer is very hard, young people do not want to receive this specialty, despite the fairly good salaries.
Решение (Продукт или Услуга)
We propose to fill this need with our printer. We suggest replacing masonry with 3D printing.
You are the owner of a coffee shop.
Competitors offer you instant coffee.
We offer a coffee machine.
The main difference from competitors is that the printer is mobile. deployment time on site 10 minutes. 10-15 mitun to prepare for printing.
How many stone makers are missing (USA and UK). 31200 + 15000 = 42,600
Market size by 2028:
42 600*250,000=$10 650 000 000
13.5% early adopters = 5,751 * 250,000 = $ 1 437 750,000
The model is calculated on the basis of "Diffusion of Innovation" by Everett Rogers
Target audience: (B2B) Real estate developers. Large construction contractors.
Sale of equipment (printer + concrete mixer)
Alternative (sale of non-exclusive rights to manufacture equipment to a major construction
Annual subscription to the on-line management program.
Sale of additional equipment for the printer.
Development of formulations for printing from materials that are available to the customer.
Целевое назначение инвестиций
We are looking for investments to complete the construction of a concrete mixer. And software. Promotion.
The construction industry is highly regulated. At the bottom stage, the contractor cannot independently decide on what to replace the brickwork with a 3 seal.
From the very beginning, the project should be designed for 3 printing.
Прохождение Инкубационных/Акселерационных программ